4 1/2” Plastic Nail
2 3/8” Head (60mm)
Quantity per Box : 50 units
- Please note that our office and warehouse will be closed from December 19th to January 4th inclusive, for the Holidays. Veuillez prendre note que nos bureaux et entrepôts seront fermés du 19 décembre au 4 Janvier 2025 pour la période des fêtes. Au plaisir de vous retrouver le 6 janvier! prochain!
Plastic Nail – PMF-412 (50 units)
36.99$
Description
SELECTION OF FASTENER SIZE
| ITEM # | Total length of fasteners | Range of thicknesses of fastened materials | Diameter of hole to be drilled in concrete | Minimum depth of drilling in concrete |
|---|---|---|---|---|
| PMF-200 | 2” | 1/2” to 1” | 5/16” | 2 1/2” |
| PMF-234 | 2 3/4” | 1” to 1 1/2” | 5/16” | 2 1/2” |
| PMF-312 | 3 1/2” | 1 1/2” to 2 1/2” | 5/16” | 2 1/2” |
| PMF-412 | 4 1/2” | 2 1/2” to 3 1/4” | 5/16” | 2 1/2” |
| PMF-538 | 5 3/8” | 3 1/4” to 4” | 5/16” | 2 1/2” |
1 – DRILL
SELECTION OF FASTENER SIZE :
- Total Lenght of Fasteners : 4 1/2” – 90mm
- Range of Thickness of Fastened Materials : 2 1/2″ to 3 1/4″ – 65mm to 80mm
- Diameter of Hole to be Drilled in Concrete : 5/16” – 8mm
- Minimum Depth of Drilling in Concrete : 2 1/2” – 65mm
2 – DRIVE INTO
Properties :
- Large 2 3/8″ diameter head (60mm)
- Firmly locks insulation panels
- Non-conductive to cold
- Easy to install
- Will not rust
- Textured head allows for covering by plaster or stucco
- Polypropylene
- Key holes lock base coat
PMF plastic nails are the perfect fastener to secure insulation to a masonry or concrete surface. Its large 2 3/8” head (60 mm) provides a firm grip and strong pullout value.
PMF plastic nails install quickly and easily in three simple steps, thereby creating substantial saving in time and money. Made entirely of high-quality polypropylene plastic, they have excellent holding power and eliminate thermal shorts.
ANCHORING DEPTH
Set the PLASTIC NAIL flush with surface
SUGGESTED FASTENER SPACING PATTERNS
TYPICAL EIFS CONFIGURATION
These drawings and spacing patterns are for general information. The specification, design and construction of all EIFS and the installation of insulating panels must comply with local building codes and applicable standards, compliance reports and the individual manufacturer’s system requirements. Only the EIFS manufacturer or design professional can furnish specifications, details, drawings, and construction practices to be followed for the actual construction and use of an EIFS product, and for the compliance with applicable local building codes and construction practices.
Additional information
| Weight | 2 lbs |
|---|---|
| Dimensions | 9 × 8 × 5 in |
