5 3/8” Plastic Nail
1 3/8” Head (35mm)
Quantity per Box : 100
45.99$
5 3/8” Plastic Nail
1 3/8” Head (35mm)
Quantity per Box : 100
ITEM # | Total length of fasteners | Range of thicknesses of fastened materials | Diameter of hole to be drilled in concrete | Minimum depth of drilling in concrete |
---|---|---|---|---|
TEC-234 | 2 3/4” | 1” to 1 1/2” | 5/16” | 2 1/2” |
TEC-312 | 3 1/2” | 1 1/2” to 2 1/2” | 5/16” | 2 1/2” |
TEC-412 | 4 1/2” | 2 1/2” to 3 1/4” | 5/16” | 2 1/2” |
TEC-538 | 5 3/8” | 3 1/4” to 4” | 5/16” | 2 1/2” |
1 – DRILL
SELECTION OF FASTENER SIZE
2 – DRIVE INTO
Properties :
TEC plastic nails are made of high-durability polypropylene. They werecreated to secure insulation panels to concrete or masonry surfaces. The fins at the end of the nails provide lots of holding power, and their large, flat heads hold the panels tightly in place.
TEC plastic nails have all the right characteristics that provide you with a high-performance mechanical attaching system that eliminates thermal shorts.
Set the PLASTIC NAIL flush with surface
These drawings and spacing patterns are for general information. The specification, design and construction of all EIFS and the installation of insulating panels must comply with local building codes and applicable standards, compliance reports and the individual manufacturer’s system requirements. Only the EIFS manufacturer or design professional can furnish specifications, details, drawings, and construction practices to be followed for the actual construction and use of an EIFS product, and for the compliance with applicable local building codes and construction practices.
Weight | 2 lbs |
---|---|
Dimensions | 9 × 9 × 7 in |